Impeller, blade wheel balancing machine TB Vent 250 manufactured by Tehnobalans
The balanced rotor is cantilever technology on the shaft. Technological shaft can be attached to the uprights of the machine (bearing in hull) is constant for rotors of small weights (set by hand) or be placed together with the rotor for heavier rotors (installation using lifting devices).
√ Corazonada measurement system imbalance
Low, doresearch speeds, increases safety and reduces the time of balancing.
√ Hard suspension
Enables correction masses to be balanced without removing product from the machine.
√ High-precision system linear motion
The movement supports the linear movement is carried out with minimal effort, one finger allows you to reconfigure the machine for another size of the rotor almost instantly.
√ High-quality components
Components manufactured in Europe (handles, rollers, pulleys, etc.) significantly increase accuracy, reliability and service life of the machine.
√ Machine bed made of polymer concrete with a vibration-absorbing coating
Reduces the dependence of the measurement from external vibrations, and allows the phase balance near other powered industrial equipment.
√ Installation on antivibration mountings
The machine requires no special Foundation (set of 4 anti-vibration mount), and can be easily moved using manual hoists.
* Output of measurement results on PC
Ease of use, versatility, lower cost machine.
Video TB Vent 250:
Certificate EAC:
TB Vent 250
Machine for balancing of rotors of large diameter, weighing up to 250 kg.
Was designed specifically for balancing of fan impellers of large dimensions. Frame made of polymer concrete on webreaper can be moved using a conventional hoists, which greatly extends the capabilities of the machine and gives the opportunity to work with impellers with a diameter greatly exceeding the size of the machine.