+7 495skypeoff 984 4297
Balancing machines. Production. Modernization.
 
  • baner
  • Bisnes-pod-klyuch
    Search by parameters
    Open
    Close
  • The diameter of the rotor
  • The type of rotor
  •  

 Machine for balancing rotors weighing up to 500 kg TB 500 production Tehnobalans

√ Corazonada measurement system imbalance

Low, doresearch speeds, increases safety and reduces the time of balancing.

√ Hard suspension

Enables correction masses to be balanced without removing product from the machine.

√ High-precision system linear motion

The movement supports the linear movement is carried out with minimal effort, one finger allows you to reconfigure the machine for another size of the rotor almost instantly.

√ High-quality components

Components manufactured in Europe (handles, rollers, pulleys, etc.) significantly increase accuracy, reliability and service life of the machine.

√ Machine bed made of polymer concrete with a vibration-absorbing coating

Reduces the dependence of the measurement from external vibrations, and allows the phase balance near other powered industrial equipment.

√ Installation on antivibration mountings

The machine requires no special Foundation (set of 4 anti-vibration mount), and can be easily moved using manual hoists.

* Output of measurement results on PC

Ease of use, versatility, lower cost machine.

TB 500

300 and allows to balance rotors weighing up to 500 kg and a maximum distance between necks up to 2000 mm.

When choosing this model it is recommended to pay special attention to the analysis of the need for additional hardware – the system layers and the reinforced prisms supports. If you plan on mainly balancing shafts that are close in mass to the limiting characteristics, this will greatly prolong the serviceability of the machine during the warranty period.