+7 495skypeoff 984 4297
Balancing machines. Production. Modernization.
 
Search
  • baner
  • Bisnes-pod-klyuch
    Search by parameters
    Open
    Close
  • The diameter of the rotor
  • The type of rotor
  •  

    TB Vent 20

    Balanced rotor is cantilevered on shaft technology. √ Corazonada measurement system imbalance At low, doresearch speeds, increases safety and reduces the time of balancing. √ Hard suspension Gives you the opportunity to carry out the process of mass correction without removing balanced product from the machine. √ High-precision linear motion The movement of the support […]

    TB 3000

    √ Corazonada measurement system imbalance Low, doresearch speeds, increases safety and reduces the time of balancing. √ Hard suspension Enables correction masses to be balanced without removing product from the machine. √ High-precision system linear motion The movement supports the linear movement is carried out with minimal effort, one finger allows you to reconfigure the […]

    TB Vent 250

    The balanced rotor is cantilever technology on the shaft. Technological shaft can be attached to the uprights of the machine (bearing in hull) is constant for rotors of small weights (set by hand) or be placed together with the rotor for heavier rotors (installation using lifting devices). √ Corazonada measurement system imbalance Low, doresearch speeds, […]

    The choice of balancers

    Surely most those who are reading this article, faced with the problem of choosing your own car. Choose according to the budget, the idea of such a car suits you or not, on the “status” you. Of course, such questions as the life of the engine and major components, comfort, safety is also not missed […]

    Dear editors !

    “dear editors!” — as a rule, all “letters of workers”, which they sent to television, radio and Newspapers, started out that way. On the other hand, as respondents, and the correspondents knew perfectly well that most of these letters, written directly by the editors. The company “Technobalance” version is not, but emails with questions about […]

    The method of balancing a composite rotors

    Work on the problems of balancing can be represented as follows: development of a method (based on research)- development of technology – execution. Earlier these problems did many different organizations: research and branch institutes, design bureaus, production facilities, etc. Now there is a trend to integrate manufacturers and developers into a single structure. Accordingly and […]

    A new method of balancing composite rotors

    The essence of the method lies in the fact that, abandoning the separate balancing of rotors included in a composite rotor to balance them together by means of pivot relative to each other.

    TB Vent 250 in Novosibirsk

    The company “Lissant Sibir” is the largest manufacturer and supplier of industrial ventilation equipment in Siberia and the far East. Existing since 2002, the company pays great attention to its own machinery equipment, preferring to buy only high-quality and reliable equipment. In December, Lissant Sibir, we have supplied and put into operation machine TB Vent […]

    TB KP

    Precision balance meets the requirements of:; – kolesnaya pair of rolling stock for speeds above 200 km/h – 50 g*m; – kolesnaya pair of rolling stock for speeds above 160 km/h – 75g*m; – kolesnaya pair of rolling stock for speeds above 80 km/h – 125 g*m.The measuring device on a personal computer provides a […]

    TB Card Optima 4600

    The machine has 4 stands, poised at once in 4 planes of correction. In the machine TB CARDAN OPTIMA all 4 racks (including motor) are movable, which facilitates installation of the cardan shaft on the machine. The machine has its own steel frame, filled with polymer concrete, treated with a special damping compound. √ Corazonada […]

    TB Card 4000

    It’s no secret that most of these balancing equipment and works with joints, length 2650-2900 mm, which greatly reduces the scope of their application. TB cardan 4000, allows you to balance not only the shafts of passenger cars, pick-UPS, short of vans and light trucks, but also the joints for commercial vehicles with extended wheelbase, […]

    TB Card 2300

    √ Corazonada measurement system imbalance with a hard suspension Low, doresearch speeds, increases safety and reduces the time of balancing. √ High-precision system linear motion The movement supports the linear movement is carried out with minimal effort, one finger allows you to reconfigure the machine for another size of the rotor almost instantly. √ High-quality […]